Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 130 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A90: TPS7A9001DSK

GOVIND S
Prodigy 120 points
Part Number: TPS7A90

Hi TI team, can you please review the attached power section from one of my new projects.

TPS7A9001DSK.pdf

  • 0
    TI__Mastermind 18466 points

    Hey Govind, 

    I took a look at your schematic and everything looks ok except the PG connection. If you are planning on using that signal, you will have to connect a pull-up resistor as delineated in the datasheet. If you do not plan on using that signal, you can leave it floating or ground it - we typically recommend grounding it because it provides a slight improvement to thermal performance. 

    Best,

    Juliette