LM3481: Schematic Review

Noel Binny Abraham

Part Number: LM3481

I would like to have a schematic review done for the LM3481 SEPIC Converter that we are planning to integrate into our systems. Can this be done through a private chat? I don't want to share it on a public domain.

over 2 years ago

0 Stefan Schauer over 2 years ago

TI__Guru 58641 points

Hi Noel,

sure you can contact me with private message - put the mouse on my name and select send private message.

To ensure tracking, it would be good to post a message here as well that you have shared the schematic via private message.

Would it be OK to give feedback here or should this go via private message as well.

Best regards,

Stefan

0 Noel Binny Abraham over 2 years ago in reply to Stefan Schauer

Intellectual 535 points

I have shared the schematic. Feedback on private chat would be preferred please.

+1 Stefan Schauer over 2 years ago in reply to Noel Binny Abraham

TI__Guru 58641 points

Hi Noel,

send you some feedback via mail.

Best regards,

Stefan

0 Noel Binny Abraham over 2 years ago in reply to Stefan Schauer

Intellectual 535 points

Please check your private chat
Thanks!

0 Stefan Schauer over 2 years ago in reply to Noel Binny Abraham

TI__Guru 58641 points

Hi Noel,

this just shows "Please check your email. I've updated the PCB"

Best regards,

Stefan

0 Noel Binny Abraham over 2 years ago in reply to Stefan Schauer

Intellectual 535 points

I did attach screenshots in the previous email. I'll add it to the private chat on the forum as well right now. Please confirm if you have received it or not.

+1 Stefan Schauer over 2 years ago in reply to Noel Binny Abraham

TI__Guru 58641 points

Hi Noel,

did receive them now and will send you an feedback once reviewed.

Best regards,

Stefan

Power management

Power management forum

LM3481: Schematic Review