BQ40Z50: I need the bqtools SDK for test purpose

Shehzad Saleem1

Prodigy 20 points

Part Number: BQ40Z50
Other Parts Discussed in Thread: EV2400, BQSTUDIO, BQPRODUCTION

Hi,

I need the bqtools SDK to automate some tests using the chip

over 2 years ago

0 Wyatt Keller over 2 years ago

TI__Guru** 105590 points

Hello Shehzad,

As Steven mentioned you will need to get in contact with the local sales team for more information, we cannot assist further on the forum.

Sincerely,

Wyatt Keller

0 Shirish over 2 years ago

TI__Guru 57697 points

The EV2400 terms of sale do not allow use for anything other than evalaution. Therefore we are unable to provide an SDK.

0 Shehzad Saleem1 over 2 years ago in reply to Shirish

Prodigy 20 points

How could I perform a calibration without the BQStudio? In the past threads, the SDK was made available.. What other options do TI provide..

0 Wyatt Keller over 2 years ago in reply to Shehzad Saleem1

TI__Guru** 105590 points

Hello Shehzad,

You can use our application note on how to perform the calibration with any communication (advanced comm, host MCU, etc) https://www.ti.com/lit/pdf/slua734

Sincerely,

Wyatt Keller

0 Shirish over 2 years ago in reply to Shehzad Saleem1

TI__Guru 57697 points

Hello Shehzad,

You can also use bqProduction if you want a readymade solution. Note that is uses a different USB interface.

Power management

Power management forum

BQ40Z50: I need the bqtools SDK for test purpose