• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 313 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS92515HV: Question about test process of TPS92515 and TPS92515HV.

Kazuya Nakai59
Guru 21585 points
Part Number: TPS92515HV
Other Parts Discussed in Thread: TPS92515, ,

Hello guys,

One of my customers is facing to TPS92515 delivery trouble due to long lead time.

At this moment, they have the following question. 
Could you please give me your reply?

Q.
They are considering using TPS92515HV or TPS92515HV-Q1 instead of TPS92515.
But they must rerun the device reliability test in their company which takes long time as their company rule
if wafer process and test item are different between TPS92515 and TPS92515HV or TPS92515HV-Q1. 

Their question is ...
Are TPS92515HV or TPS92515HV-Q1 wafer process and test item different from TPS92515 one? 

Your reply would be much appreciated.

Best regards,
Kazuya.

  • 0
    TI__Mastermind 23256 points

    Hello Kazuya,

    The HV and non-HV have the same process, package and manufacturing flow.  From a test stand point the Non-HV is a subset of the HV.  A HV device can be used in a Non-HV application but not the other way around.  The customer can use either the HV or the HV-Q1 in their Non-HV application,.

    -Francis Houde