How to control the current limit for PFC with 10% load ?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Venish,
The controller will be designed for full load and Rimo is configured for this load. If you want to change this you might want to change Rimo to control the power delivered to load. Please refer the following document for setting the resistors:
Regards,
Harish
Hello Harish Ramakrishnan5 sir,
Thank you for the information. I need to choose an inductor for a UCC28218 chip. Please give any suggestions.
Hi Venish,
Please refer the document below for detailed design and selection of boost inductor.
https://www.mag-inc.com/Products/Powder-Cores/Kool-Mu-Cores/PFC-Boost-Design
Regards,
Harish