• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 103 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS53681: Questions of TPS53681

Jimmy Lai
Expert 6845 points
Part Number: TPS53681

Dear Team,

 

I export the current system file as attached. (Checksum is F229DFB), and below is compare result. (only show differences)

Please help to solve this problem, we need to ensure the checksum of FW code we provided is consistent with sending to the factory programmed. Thanks a lot.

Besides, I would like to know does TI have any tool or dongle that can simulate AVS voltage dynamic to let us verify Vout accuracy? 

TPS53681 0.0 Address 89 Project File.xmlTPS53681 SD_AVDD and SD_AVDDH 89d_B2_F229DFA.xml 

Many Thanks,

Jimmy

  • 0
    TI__Expert 8630 points

    Hi, Jimmy,

    No, TI does not have tool to simulate AVS voltage dynamic.

    Regarding the checksum differences, please make sure to click on "Store Config to NVM", to synchronize between PMBus commands and USER_DATA_XX, before save the project file.

    Regards

    Anne Ngo

    Texas Instruments