LM5155: Pspice error

Junghyun Park

Part Number: LM5155

I am using pspice for TI, but suddenly ORCAP-15052 error occurs and netlist cannot be created.I deleted too many and reinstalled it, but judging from the continuing problem, I think I need to change the access key as well.

over 2 years ago

0 JC Zhu over 2 years ago

TI__Mastermind 37560 points

Hi Junghyun,

What error are you getting right now? Installation or run time error? Please share a screenshot.

Thanks,
JC

0 Junghyun Park over 2 years ago

Prodigy 65 points

When generating a netlist, an error window appears indicating the inability to open the property mapping file. An informational message suggests checking if devparam.txt exists in the installation path, but I can confirm that the file does exist in my installation path.

+1 JC Zhu over 2 years ago in reply to Junghyun Park

TI__Mastermind 37560 points

Hi Junghyun,

Please take a look at this thread: https://e2e.ti.com/f/1/t/1219020

Please check whether the path to the file is in your sim profile:

Thanks,
JC

0 Junghyun Park over 2 years ago in reply to JC Zhu

Prodigy 65 points

The lib path is designated as the path where I first installed it. I solved it. thank you.

Power management

Power management forum

LM5155: Pspice error