This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Expert,
According to TPS74701 datasheet,when Css open, minimum start-up time is 200us,This start-up time is from EN high to output begin to rise, right?
Besides,when Css open,Pin functions mention that soft-start ramp time is typically 200us,but in table 4 soft-start time is 0.1ms,how to understand this "0.1ms"?
Thanks for support!
Michael.
Hi Michael,
The soft-start time is the 10-90% rise time, and not the delay until the output starts to ramp.
I think the Table 4 value for open Css is probably wrong. Figure 20 shows an example startup and the startup is much closer to 200us than 100us. The EC specs are what you should take as true.
Regards,
Nick
Hi Nick,
How about the time from EN high to output starts to ramp? It seems not found in datasheet.
Thanks!
Michael.
Hi Michael,
We don't have data for the delay time. It seems to have a dependency on CFF from Figure 20. You can approximate the delay from Figure 20 as well.
Regards,
Nick