Hi Team,
My customer would like to know what is VOUT rise time (tr) with following condition. Or, could you provide it or tell us how to calculate it. Thanks.
Condition:
Vin=1.8V
CIN=1uF
Vout=1.8V
CL=4.7uF
RL=1M
Best regards,
Hardy
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
My customer would like to know what is VOUT rise time (tr) with following condition. Or, could you provide it or tell us how to calculate it. Thanks.
Condition:
Vin=1.8V
CIN=1uF
Vout=1.8V
CL=4.7uF
RL=1M
Best regards,
Hardy
Hi Hardy,
I'm looking into this and will update the thread when I have an answer.
Thanks,
Patrick
Hi Patrick,
Any update. customer is pushing this data. Or, we may lose this opportunity.
Best regards,
Hardy
Hi Hardy,
Thanks for your patience, I will test this on an EVM tomorrow morning Dallas time. Is the customer looking at variant B (fast rise) or C (slow rise)?
Thanks,
Patrick
Hi Hardy,
I have 2 EVMs with variant C. I will test the variant C rise time tomorrow morning.
Thanks,
Patrick
Hi Hardy,
Thanks for your patience. I tested these conditions on an EVM yesterday and obtained the results shown below. Please note that this should serve as design reference only, and this value is not guaranteed as they are not in the data sheet.
Trise is about 500us.
Thanks,
Patrick