Dears,
I will measure the gain margin and phase margin.
Because it is with adaptive on-time pulse width modulation (PWM) controller, can I do that by the method of original PWM structure?
Thank you.
Best Regards
Clous
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dears,
I will measure the gain margin and phase margin.
Because it is with adaptive on-time pulse width modulation (PWM) controller, can I do that by the method of original PWM structure?
Thank you.
Best Regards
Clous
Hi Clous,
I am not sure if the original method you mentioned matches what I understand, please refer to the figure and link below.
Best Regards,
Zhou
Hi Zhou,
Thank you for your reply.
I will check it with our EIT engineers.
Best Regards,
Clous