• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 75 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CSD95373AQ5M: Recommended schematic overview

Lawrence He
Expert 2830 points
Part Number: CSD95373AQ5M

Hi, Support Team

We saw the CSD95373AQ5M datasheet 9.1.1 recommended schematic overview

C16 and R2 show DNP, if i add C16 and R2 could help for EOS issue?

if any suggestion. Please advise me.

Thanks,

Best regards,

Lawrence

  • 0
    TI__Expert 8960 points

    Hi Lawrence,

    C16 & R2 form a snubber circuit to slow down the dv/dt of the switch node. This usually reduces switch node ringing/overshoot & improves EMI performance. However, this circuit is often unnecessary, and reduces efficiency, so we recommend leaving it DNP unless a problem arises that requires populating it.

    Thanks,

    Travis