TPS7H4010-SEP: TPS7H4010EVM - Mounting holes location

Antonio Fernandez

Part Number: TPS7H4010-SEP
Other Parts Discussed in Thread: TPS7H4010EVM

I am working on the design of a mounting HW plate to perform proton radiation tests on the TPS7H4010-SEP.

For this purpose, I'd like to use the TPS7H4010EVM evaluation board, but I couldn't find any mechanical information about the EVB mounting posts location.

Could anybody please share any document, or possibly a sketch, with that information?

Much appreciated.

over 2 years ago

0 Daniel Hartung over 2 years ago

TI__Mastermind 28475 points

Hey Antonio,

Could you please be a bit more descriptive?

Are you looking for mechanical information on the package of the TPS7H4010-SEP?
Mechanical information on the footprint?

Thanks,
Daniel

0 Antonio Fernandez over 2 years ago in reply to Daniel Hartung

Prodigy 10 points

Hi Daniel,

I am looking for a mechanical drawing, or image, that shows the location of the mounting holes of the TPS7H4010EVM evaluation board (https://www.ti.com/lit/ug/snvu744/snvu744.pdf).
The available documentation doesn't include any board dimensions.

Thanks,

Antonio

0 Daniel Hartung over 2 years ago in reply to Antonio Fernandez

TI__Mastermind 28475 points

Hey Antonio,

What do you define as the "mounting holes"?
Are you planning on trying to repurpose the board to mount to something?

Thanks,
Daniel

0 Antonio Fernandez over 2 years ago in reply to Daniel Hartung

Prodigy 10 points

This is what I need:

0 Daniel Hartung over 2 years ago in reply to Antonio Fernandez

TI__Mastermind 28475 points

Hey Antonio,

Note that the holes are used for the standoffs for the board and are not typically used for mounting:

A: 3870 mil
B: 2746.5 mil
C: 2753.5 mil
D: 4270 mil
E: 5900 mil

Thanks,
Daniel

Power management

Power management forum

TPS7H4010-SEP: TPS7H4010EVM - Mounting holes location