TPS548B27: Altium export from Webench fails

Ralph Sprang

Part Number: TPS548B27

When I create a design using Webench and try the Altium export option, the export fails and reports first "export in progress" and then "export failed". This seems to occur for any part and any of the other export options as well.

over 2 years ago

0 David_Daniels over 2 years ago

TI__Mastermind 23695 points

I reported the failure to the webench team and waiting for a response

0 Ralph Sprang over 2 years ago in reply to David_Daniels

Prodigy 10 points

Thanks, hopefully they respond soon, it has been a week.

0 David_Daniels over 2 years ago in reply to Ralph Sprang

TI__Mastermind 23695 points

I heard back and the team stated they were getting intermittent failures and have not completely resolved.

I can send you the evm altium files through the e2e email system if that will help.

Accept my e2e friendship request and I can send

0 Ralph Sprang over 2 years ago in reply to David_Daniels

Prodigy 10 points

Yes, that would help, thanks. I accepted your friend request.

I am using these parameters:

Export TPS548B27RYLR ‑ 4V-5.5V to 3.30V @ 10A

Input:

DC 4 V - 5.5 V

Output:

3.3 V at 10 A

Temp:

85 °C

Change

0 David_Daniels over 2 years ago in reply to Ralph Sprang

TI__Mastermind 23695 points

Ralph

Sent files via private e2e messaging.

If any more assistance needed respond to the post or start a new post

Best Regards.

David

0 Ralph Sprang over 2 years ago in reply to David_Daniels

Prodigy 10 points

The files sent were helpful but I would still like to be able to generate the files from WEBENCH, I need to adjust parameters and the files sent are more complex than the WEBENCH design.

0 David_Daniels over 2 years ago in reply to Ralph Sprang

TI__Mastermind 23695 points

I reported the urgency to the webench team and they are working on it. I do not think it wil be a quick resolution.

The evm files are the closest I can get to the webench

0 David_Daniels over 1 year ago in reply to David_Daniels

TI__Mastermind 23695 points

Closing since the Webench team is working on resolution

Power management

Power management forum

TPS548B27: Altium export from Webench fails