LMR36015AEVM: Design files

Angelos Koliadimas

Prodigy 50 points

Part Number: LMR36015AEVM

Could you provide the LMR36015AEVM design files?

over 1 year ago

0 Youhao Xi over 1 year ago

TI__Guru* 75865 points

Hi Angelos,

Thank you for posting. I will contact the responsible engineer. I believe the design was done in Altium. Do you need the Altium files, or just Gerber files?

Thanks,

Youhao

0 Angelos Koliadimas over 1 year ago in reply to Youhao Xi

Prodigy 50 points

Altium files would be great, but if it is not possible, also Gerber files are ok.

0 Youhao Xi over 1 year ago in reply to Angelos Koliadimas

TI__Guru* 75865 points

It is available at TI.com. Link below and you can choose Alitium version from the pulldown menu. For you convenience, I paste the link below.

https://vendor.ultralibrarian.com/TI/embedded/?gpn=LMR36015&package=RNX&pin=12&sid=017be0b04cb20009bf8bcba127e203072001b06a00bd0&c=1

Hope this helps.

youhao

0 Youhao Xi over 1 year ago in reply to Youhao Xi

TI__Guru* 75865 points

Hi Angelo,

Sorry for my mistake. The above was responding to a different post but I messed it up. I am still working on getting the design files for you.

Apology for the confusion.

Thanks,

Youhao

+1 Youhao Xi over 1 year ago in reply to Youhao Xi

TI__Guru* 75865 points

Hi Angelo,

Gerber files of the EVM is attached. Due to legal concerns, TI logo is removed from the board files. Please also note the disclaimer of sharing this design file: All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml).

Gerbers_and_NCdrill.zip

Best Regards,

Youhao

0 Angelos Koliadimas over 1 year ago in reply to Youhao Xi

Prodigy 50 points

Thank you!

0 Youhao Xi over 1 year ago in reply to Angelos Koliadimas

TI__Guru* 75865 points

Hi Angelos,

Hope the issue is resolved so I can close the thread. You are welcome to re-open it by adding a new post.

Thanks,

Youhao

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Power management

Power management forum

LMR36015AEVM: Design files