• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 293 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR50410: Replacing Non Sync Converter

Dice-K
Mastermind 6817 points
Part Number: LMR50410
Other Parts Discussed in Thread: LMR54410, , LMR14010A, LMR51610

Hi support team,

The LMR54410 has the function of "Replacing Non Sync Converter".


Does LMR50410 have this function?
Can I replace the LMR14010A?

Regards,
Dice-K

  • +1
    TI__Genius 13735 points

    hi, Dice,

    same question reply to you ,LMR54410 LMR50410 can replace the LMR14010A. we have a new product LMR51610 is the same.

    Elena

  • 0 in reply to Elena Gao
    Mastermind 6817 points

    Hi Elena,
    Thank you for your reply.

    There is no description of "Replacing Non Sync Converter" in the data sheet "SLUSDW3A" of LMR50410.
    I would like the description to be updated to be similar to other devices.

    Best regards,
    Dice-K

  • 0 in reply to Dice-K
    TI__Genius 13735 points

    hi, Dice,

    emm, maybe we could not do this update, because for most sync device the LS mos could parallel with a diode, compare the resistor of this two part, that means we will update almost all DS sync to no sync ?

    My way is let customer refer to LMR54410 or LMR51610 if  target update no-sync to sync, and confirm the other device should be the same. Now as I know only this two part have the section of sync and no-sync .

    Elena