Hello Sir:
We are using two BQ76952 on our battery pack.
It's on 10s cell application
Would you please help to check our schematic?
Looking forward your feedback.
Thanks a lot.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Sir:
We are using two BQ76952 on our battery pack.
It's on 10s cell application
Would you please help to check our schematic?
Looking forward your feedback.
Thanks a lot.
Hi Statham,
Due to the September 4 US Holiday, we will be out of office till September 5.
Regards,
Arelis G. Guerrero
Hi Statham,
Your schematic looks good. The only comment I have is the devices will not be able to enter shutdown mode at any point since the TS2 pin will always be pulled down by the attached thermistor. If that's alright, then there's no issue.
Also, you can add a 10MOhm pull-down to VSS for the base of both Q16 and Q22.
Regards,
Max Verboncoeur