This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
My customer's application has transient current 4.98A within 27us, which is higher than the device's current limit.
Will this short over current condition cause any issue?
Regards,
Experiencedly it is ok since it not over too much and time is short, but we have no related test data. and if customer accept the VOUT drop during the HFET current limitation triggered.
Also I suggest customer could run stress test to double check.
Yuchang