Power management

Power management forum

State Resolved
Locked Locked
Replies 6 replies
Answers 2 answers
Subscribers 63 subscribers
Views 383 views
Users 0 members are here

Support feedback

Options

Options

Related

BQ34Z100-R2: GPCCHEM

cong w

Prodigy 60 points

Part Number: BQ34Z100-R2
Other Parts Discussed in Thread: GPCCHEM, GPCRA0

I'm continuing to send the zip file to GPCCHEM tool, but I receive this answer:

The following errors were reported by the calculation engine:
Error: Wrong data format make sure file has coma or tab separated values. Name: roomtemp_rel_dis_rel.csv

I had tried with this separator : comma, semicolon, tab

Thank you for your helpIFR33140 2.zip

over 2 years ago

0 Anthony over 2 years ago

TI__Mastermind 28480 points

Hello,

In your roomtemp_rel_dis_rel.csv document, you have three total excel sheets created on the book, with one being the data and the others being blank. This could be throwing the error.

Regards,

Anthony Baldino

0 cong w over 2 years ago in reply to Anthony

Prodigy 60 points

Thank you. I found the reason this afternoon. This can only be done in one column, with all data written in and separated by commas.

Best wishs.

0 cong w over 2 years ago in reply to Anthony

Prodigy 60 points

Hello，I want to know why my BQ34Z00 did not change to 06 in the S5 stage, but my Ra has already been updated？

I have failed four or five times already.

0 Anthony over 2 years ago in reply to cong w

TI__Mastermind 28480 points

Hello,

If the Ra table is updating, then there should be no issue manually changing the Learned Status value from 5 to 6.

Below is a link to the GPCRA0 tool, which can help you confirm is the Ra table values are correct.

https://www.ti.com/tool/GPCRA0

Regards,

Anthony Baldino

0 cong w over 2 years ago in reply to Anthony

Prodigy 60 points

R a0 Flage is 5555. Does it indicate that Ra is updated successfully? The check register says 5555 is discharging, but I have stopped discharging.

0 Anthony over 2 years ago in reply to cong w

TI__Mastermind 28480 points

Hi Cong,

This means the Discharge mode and cell impedance has been updated. The meaning of the Ra0 flag can be found below:

Regards,

Anthony Baldino