Hi
I'm using bqStudio with EV2400 and BQ27220EVM. My battery capacity is 950 mAh. How I change Full Charge Capacity default value 3000 mAh to 950 mAh in bqStudio?
Hi Jari,
If you enter Data Memory -> Gas Gauging, you can find the Full Charge Capacity and Design Capacity able to change here:
Regards,
Anthony Baldino
HI, my view in Data memory -> Gas gauging is different
I changed values to 950 mA, but still in Register there is 3000 mAh. Why is that?
Hi Jari,
Before making changes in Data Memory, the device has to be full access unsealed using the UNSEAL_FULL_ACCESS command and be entered into configuration update mode using the ENTER_CFG_UPDATE command.
Once these two have been accomplished, change the value of the Full Charge Capacity in Data Memory to the desired value and enter Advanced Comm.
Make these two commands:
If this value read correctly matches the desired Full Charge Capacity when converted from hex to decimal, then the register has been changed.
Regards,
Anthony Baldino
