BQ25620: can Vindpm_bat_track be configured?

Given Ding

Part Number: BQ25620
Other Parts Discussed in Thread: BQ25601

Hi Team,

For below spec, in BQ25601, there are several config but in BQ25620, it seems fixed. Just want to double check if it is actually fixed.

BRs

Given

over 1 year ago

0 Ning T over 1 year ago

TI__Guru 57341 points

Hi Given,

For BQ25620, the function is enabled via the VINDPM_BAT_TRACK register bit. When enabled, the actual input voltage limit is the higher of the VINDPM register or VINDPM_BAT_TRACK (VBAT + 400 mV typical offset) without other options.

Thanks,

Ning.

0 Given Ding over 1 year ago in reply to Ning T

TI__Genius 10085 points

Hi Ning,

understood. I already check the datasheet and it mentioned as you described.

What I want to know is whether the 400mA threshold can be configured to other value? sorry for make you confused. Thanks.

BRs

GIven

+1 Ning T over 1 year ago in reply to Given Ding

TI__Guru 57341 points

Given,

400 mV is fixed.

Thanks,

Ning.

Power management

Power management forum

BQ25620: can Vindpm_bat_track be configured?