Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 132 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV62569: how to eliminate the oscillations?

Eric Liu(SZ-FAE)
Intellectual 1590 points
Part Number: TLV62569

Hi team,

is there any way to improve this?

thanks

  • 0
    TI__Genius 17350 points

    Hi Eric,

    Those oscillations during the startup ramp is normal as the device starts in PFM and the internal reference is gradually ramped up. This typically doesn't affect the application as you don't see this in steady state.

    Adding more load current can help reduce the ripple voltage during the startup ramp. A larger inductor may also be useful.

    Best regards,

    Varun