• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 173 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5176-Q1: Webench fails to create OrCAD schematic during schematic create

Bill Dempsey
Prodigy 10 points
Part Number: LM5176-Q1
Other Parts Discussed in Thread: LM5176

Hi

While running webench for the LM5176 the create schematic/download acts properly but does not actually generate a valid schematic. The ZIP file is empty.  If I try to run the Altium creator option it appears to work just fine.  Can you please look into why the OrCAD schematic create feature is broken for this part?


Thank you
Bill

  • 0
    TI__Expert 5800 points

    Hi Bill,

    Currently on Webench this a generic issue with OrCAD schematic export which is observed over most of the parts. This issue seems to be tricky. We are still not able to find the exact reason behind it. Our experts are working on it. We are expecting delays to find the solution. We will let you know once we fix the issue. Please note that this might take a longer time than expected. Thanks for your patience. 

    Regards,
    Umayal