• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 96 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM61495_WEBENCH POWER DESIGNER_CLARIFICATION

Chitharanjan M1
Intellectual 360 points
Other Parts Discussed in Thread: LM61495

HI,

I have selected LM61495 buck regulator part for the following requirement .I have tried to design in TI WEBENCH Designer by giving following input parameter and Observed that  "Design cannot be created!"

May I know what exactly the issue ?

  • VIN-24V
  • VOUT-12V
  • IOUT-5A

Regards,

Chitharanjan M

  • 0
    TI__Guru 50120 points

    Hello Chitharanjan,

    I was able to generate a VIN = 24V, VOUT = 12V, IOUT = 5A, FSW = 400kHz WEBENCH design.

    Please see attached exported link for design: https://webench.ti.com/appinfo/webench/scripts/SDP.cgi?ID=15F8998ED6D73D6B

    Regards,

    Jimmy