TPSM8D6C24: Datasheet revision timeline

Kazuki Itoh

Part Number: TPSM8D6C24

Hi team,

As discussed in previous thread below, I found multiple wrong datasheet description.

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1116754/tpsm8d6c24-datasheet-description

I believe datasheet revision is needed someday.

Could you let me know the datasheet revision schedule if available?

My customer wants to know that in advance because they need to check the updated descriptions.

Best regards,

Kazuki Itoh

over 1 year ago

+1 Nancy Zhang over 1 year ago

TI__Mastermind 49430 points

Hi Kazuki

We will start to update the datasheet soon. The timeline would be end of Oct, 23. I will let you know.

Thanks,

Nancy

+1 Nancy Zhang over 1 year ago in reply to Nancy Zhang

TI__Mastermind 49430 points

Hi Kazuki,

For item 7.5.2.5 MSEL2 for a loop follower device, we will not add low level current limit since it is stack application (2-4 phase parallel with higher output current). If customer would like to use lower level current limit, they can use single phase or lower current converter. Also customer can use design tool to set lower level current if they want multi-phase with low current(unlikely). We will update other typos.

Thanks,

Nancy

0 Kazuki Itoh over 1 year ago in reply to Nancy Zhang

TI__Genius 10730 points

Hi Nancy-san,

It's the end of Oct, 23. Do you have any update on the datasheet revision?

Best regards,

Kazuki Itoh

+1 Nancy Zhang over 1 year ago in reply to Kazuki Itoh

TI__Mastermind 49430 points

Hi Itoh-san,

The datasheet has been revised and is waiting for finally approval to release to ti.com this week or next week. Please double check the draft as attached here. Thanks for pointing out all errors.

Tri-ccfffce1-8790-4cc5-928d-16ba40cb89e3.pdf

Thanks,

Nancy

Power management

Power management forum

TPSM8D6C24: Datasheet revision timeline