LP5860EVM: Problem to use LP5860 EVM...

Peter Tseng

Genius 5930 points

Part Number: LP5860EVM
Other Parts Discussed in Thread: USB2ANY, LP5860

Hi Team,

My customer wants to evaluate LP5860 EVM and while plug the USB2ANY, the error message popup as below.

Please help on it!

Thanks.

over 1 year ago

0 Jared Zhou over 1 year ago

TI__Genius 17385 points

Hi Peter,

Please try to press the BSL button and the same time unplug and re-plug the USB2ANY.

If you don't mind, please contact me via email. Here is my email address (jared-zhou@ti.com). Thanks!

BR, Jared

0 Jared Zhou over 1 year ago in reply to Jared Zhou

TI__Genius 17385 points

Hi Peter,

1. When the GUI shows that update information, please don't click on the UPDATE. First, please press the BSL button and at the same time, unplug and re-plug the cable. Please note that when you unplug and re-plug the cable, please keep pressing the BSL button.

2. After you re-plug the cable, then you can click UPDATE and you will see the software update succeeded.

BR, Jared

0 Jared Zhou over 1 year ago in reply to Jared Zhou

TI__Genius 17385 points

Add one more comment, please restart the GUI after you update it succeeded.

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Power management

Power management forum

LP5860EVM: Problem to use LP5860 EVM...