Other Parts Discussed in Thread: USB2ANY, LP5860
Hi Team,
My customer wants to evaluate LP5860 EVM and while plug the USB2ANY, the error message popup as below.
Please help on it!
Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Peter,
Please try to press the BSL button and the same time unplug and re-plug the USB2ANY.
If you don't mind, please contact me via email. Here is my email address (jared-zhou@ti.com). Thanks!
BR, Jared
Hi Peter,
1. When the GUI shows that update information, please don't click on the UPDATE. First, please press the BSL button and at the same time, unplug and re-plug the cable. Please note that when you unplug and re-plug the cable, please keep pressing the BSL button.
2. After you re-plug the cable, then you can click UPDATE and you will see the software update succeeded.
BR, Jared