Hi team,
A question for bq40z50-r4.
The pins LEDCNTLA/LB/LC can be configured for high-Z.
Do we have a value for the high-Z impedance range?
Thank you!
Austin Allen
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
A question for bq40z50-r4.
The pins LEDCNTLA/LB/LC can be configured for high-Z.
Do we have a value for the high-Z impedance range?
Thank you!
Austin Allen
Hello Austin,
We do not specify the the impedance of the GPIO when configured as open drain high-Z, I would use the reference of 1uA max leakage current for reference.
Sincerely,
Wyatt Keller