TPS7A85A: VIH and VIL levels of Any-Out pin

Abhijit Khadilkar

Part Number: TPS7A85A

Hi Experts, I want to control the Any-Out pins of this LDO using FPGA LVCMOS IO or I2C expander. What are the VIH and VIL levels for this pin to pull it to ground and keep it open.

I have referred the https://www.ti.com/lit/an/sbva035a/sbva035a.pdf?ts=1699877073097&ref_url=https%253A%252F%252Fwww.google.com%252F app note. Is this app note applicable to TPS7A85A or TPS7A84A or TPS7A8300ARGWT device?

thanks, Abhijit

over 1 year ago

0 Josh Nachassi over 1 year ago

TI__Expert 5231 points

Hi Abhijit,

I have reached out to a colleague regarding this question and will get back to you with an answer. He has very in-depth knowledge on this topic.

Thank you,
Josh Nachassi

0 Abhijit Khadilkar over 1 year ago

Intellectual 295 points

Hi Josh, Did you get an answer from your colleague?

thanks, Abhijit

0 Josh Nachassi over 1 year ago in reply to Abhijit Khadilkar

TI__Expert 5231 points

Hi Abhijit,

Hope you are doing well. His response was that there is no VIL on ANYOUT pin floating. It must be ground in order for the internal feedback resistors to work. Please let me know if you want further clarification.

Thank you,

Josh Nachassi

0 Abhijit Khadilkar over 1 year ago in reply to Josh Nachassi

Intellectual 295 points

Hi Josh,

Can we use a I2C expander with TPS7A85A or TPS7A84A or TPS7A8300ARGWT to change the output voltage of the LDO?

If the answer to the above question is no, can you please suggest an LDO with good PSRR, output current of minimum 2A (greater than 2A is better), which can work in the range of 0.8V to 3.3V (or more), which can be controlled through SPI or I2C.

thanks, Abhijit

0 Josh Nachassi over 1 year ago in reply to Abhijit Khadilkar

TI__Expert 5231 points

Hi Abjijit,

Yes you can use the I2C expander and you can use that document to follow the guidelines to create this. Please note that the document is for a different device and changes will be necessary.

Thank you,

Josh Nachassi

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Power management

Power management forum

TPS7A85A: VIH and VIL levels of Any-Out pin