LM3553SDEV: LM3553SDEV

Nicolas Lesellier

Part Number: LM3553SDEV
Other Parts Discussed in Thread: USB2ANY, LM3553

Hello, I received the LM3553SDEV kit today with no software. Can you please share a link to download the software. Best Regards.

over 1 year ago

0 Ives Li over 1 year ago

TI__Expert 6440 points

Hi,

You can use the USB2ANY interface adapter and the software USB2ANY explorer for the evaluation:

USB2ANY Evaluation board | TI.com

Or you can evaluate the device by any controller with typical I2C interface.

Thanks!

0 Nicolas Lesellier over 1 year ago in reply to Ives Li

Prodigy 10 points

Hi,

I don't see why I should buy an additional 100$+ adapter to use the evaluation kit. You used to deliver the software with LM3553SDEV in the past, I simply need the old software.

Best Regards.

0 Ives Li over 1 year ago in reply to Nicolas Lesellier

TI__Expert 6440 points

Hi,

Because LM3553 is a very old device, so the software might not work with some newer computers due to the USB1.1 standard that board complied with.

The best solution is trying to use another I2C generator and manually connect it to the LM3553EVM itself.

Thanks!

Power management

Power management forum

LM3553SDEV: LM3553SDEV