Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 194 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5170EVM-BIDIR: MCU operating bidirectional power converter

Isabelle Olars
Prodigy 20 points
Part Number: LM5170EVM-BIDIR
Other Parts Discussed in Thread: LM5170, LM5171EVM-BIDIR

Hello! I want to make a 12/24 V bidirectional power converter (with the LM5170 EVM) using the F28379D Launchpad as MCU. In the user's guide it says to contact TI for info on operating with C2000 MCU. I haven't done any similar projects before and would therefore appreciate any tips you may have for me. 

  • 0
    TI__Genius 15385 points

    Hi Isabelle,

    Signals required from an MCU include UVLO, EN1/EN2, DIR, ISETA or ISETD.

    UVLO, EN1/EN2, DIR are just logic levels while ISETA or ISETD should come from a digital loop.

    We don't have any firmware that is ready. Please contact the MCU team for help.

    You may also consider LM5171EVM-BIDIR.

    Best Regards,

    Feng Ji