• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 312 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65994AE: Merged PD3 Test Fail

neil
Prodigy 20 points
Part Number: TPS65994AE

read more...

  • 0
    Prodigy 20 points

    Hi Team,

    I use the TPS65994BHYBGR for notebook Thunderbolt design.But I can't found P/N: TPS65994BHYBGR ,so use similar P/N.

    Here is my fail test result.

    What should I adjust my Firmware for this fail?

    TEST.PD.PS.SRC.03: The power drawn by the UUT measured in the 1ms before sending PS_RDY, exceeded pSnkStdby max./The power drawn by the UUT exceeded pSnkStdby max after a total of tSrcTransition min.
    TEST.PD.PS.SNK.01: The power drawn by the UUT exceeded pSnkStdby max after a total of tSrcTransition min.

    BR,

    Neil

  • 0 in reply to neil
    TI__Guru 63821 points

    Hello Neil,

       This will be handled differently.  The local FAE has already been contacted.

      Thank you for your patience.  Please reply to this thread if you don't receive an external follow up.

    Regards,
    Chris