BQ33100: ACCESSING DATA FLASH PARAMETER

Vishnu V

Part Number: BQ33100
Other Parts Discussed in Thread: BQEVSW, EV2400

Hi Team,

Is it possible to change the CB threshold parameter using SMbus communication. Can we change the CB threshold parameter instantaneously without using the evaluation software.

Regards,

Vishnu

over 2 years ago

0 Wyatt Keller over 2 years ago

TI__Guru** 107635 points

Hello Vishnu,

It is not recommended to change the dataflash while in the field, you should upload your golden image during production and the settings will remain constant. You can edit the parameters but it requires using the data block with the offset in order to access or change data: 8.5.3 Data Flash. The easiest way would be to capture a DF write with a logic analyzer using BQEVSW and EV2300/EV2400.

Sincerely,

Wyatt Keller

0 Vishnu V over 2 years ago in reply to Wyatt Keller

Intellectual 304 points

Thanks Wyatt.

Power management

Power management forum

BQ33100: ACCESSING DATA FLASH PARAMETER