• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 292 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

USB-PD-CHG-EVM-01: procedure to flash and evaluate USB-PD-CHG-EVM-01

Ernest Yong
Expert 4600 points
Part Number: USB-PD-CHG-EVM-01

Hi Team,

Currently my customer is having USB-PD-CHG-EVM-01  evaluation board. with below tools:

1.usb2 any 

2.aardvark programmer 

 

They tried to download aardvark programmer from total phase but they were unable to flash it .

 

Could you please share the procedure to flash and evaluate the USB-PD-CHG-EVM-01 kit 

Many thanks!

  • +1
    TI__Mastermind 40845 points

    Hello,

    1. Please attach an appropriate battery source to BATT and GND.

    2. Attach the Aardvark in the correct orientation to J5.

    3. Download and Install Flash-Center-Gui from Total Phase.

    4. Choose the correct target, "CAT24C256."

    5. Add the current Aardvark Adapter.

    6. Load the new binary file to be flashed.

    7. Program and verify the flash.

    8. Ensure the flash is verified.

    9. Remove power to board and POR board for settings to stick.

    For more help with Flash Center please contact Total Phase.

    Regards,

    Mike Emanuel