Hi Team,
May I know if a PSU module with the UC29002 Current share has a recommended method for factory using the VR correction voltage, either unloaded or fully loaded.
Thanks!
BRs,
Jamie
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
May I know if a PSU module with the UC29002 Current share has a recommended method for factory using the VR correction voltage, either unloaded or fully loaded.
Thanks!
BRs,
Jamie
Hello Jamie,
Thank you for your question about using the UCC29002 load-share controller.
I am unfamiliar with the terms "VR correction voltage". Can you please explain this, or rephrase your question in another way, please?
Load-sharing accuracy is most important in the fully-loaded case, and less so at lighter and lighter loads.
The sharing of unloaded (or nearly unloaded) PSUs will not be very accurate, but generally this is not a problem for most applications.
Regards,
Ulrich