This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I'm working on a BMS design with the BQ3060 using the following design guide:
https://www.ti.com/lit/an/slua507/slua507.pdf?ts=1707167790800
I was wondering if there are any guidelines or formulas for precharge current calculations based on my battery and charger. I need this parameter to calculate the accompanying resistor for the precharge FET.
Thank you!
Hi,
Typically, pre-charge current is specified in the datasheet of the battery.
Regards,
Evan