• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 56 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

$core_v2_language.Truncate($relatedThread.Subject, 120, "...")

LM5066I: 79h register

Naizeng Wang
Expert 4540 points
Part Number: LM5066I

Hi team,

I have two questions about 79h register. Customer found that during OC event, bit2 in 0x04h is 1 and bit4 in 0x79h register is also 1. But it writes in datasheet that IOUT OC is not supported and always keeps at 0. Could yo u please explain the reason? 

  • 0
    TI__Mastermind 30915 points

    Please read these following registers after the overcurrent event and share the data. 

    78h STATUS_BYTE

    79h STATUS_WORD

    7Ah STATUS_VOUT

    7Ch STATUS_INPUT

    7Dh STATUS_TEMPERATURE

    7Eh STATUS_CML

    7Fh STATUS_OTHER

    80h STATUS_MFR_SPECIFIC