Other Parts Discussed in Thread: UCD3138A, UCD3138
HI guys,I encountered a problem when configuring the compilation environment.
- Environment:Code Composer Studio 12.5.0(Compiler version [TI V5.2.9])
- Part number:PMP23340UCD (UCD3138A)
- Firmware1:UCD3138_IBC_Firmware.(This Firmware is developed for UCD3138A device and for the IBC application and LLC topology.)
- Firmware2:UCD Training-labs.
- When I import the project(Firmware1), I find the configuration parameters as shown in the picture, is this correct?
- I changed the chip number.But there was an error.
- I tried to fix the above error and a new warning appeared, now what should I do.
- I tried to replace the CMD file but I get the same error.
- But when I import another routine (Firmware2)and change the chip model and cmd file as above, there is no error.
Why is this, is this the right thing to do, and how do I fix this?!!Thank you.