• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 345 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25798: Schematic Review

Fabio Gou
Expert 4575 points
Part Number: BQ25798


Could you pls review the schematic of BQ25798?

  • 0
    TI__Guru**** 171106 points

    HI Fabio,

    Looks good except for SDRV needs a 1000pF to GND not connected to BAT.  Please ensure that the derated capacitance on PMID, BAT, VBUS and especially SYS, after applied max voltage, is at least per the min values below:

     

    Regards,

    Jeff