LM5163H-Q1: EN/UVLO VSD-RISING/FALLING

Robert Lundström

Part Number: LM5163H-Q1
Other Parts Discussed in Thread: LM5163

Hi,

I’m currently using an LM5163 in my design and I have a question about VEN/UVLO-rising and VEN/UVLO-falling. In the datasheet VEN/UVLO-rising is specified to max 1.1V and VEN/UVLO-falling is specified to min 0.45V.

Are there any min and max value for those parameters?

over 1 year ago

0 David Baba over 1 year ago

TI__Mastermind 40040 points

Hello Robert,

please see Rising and falling UVLO values, max and min.

David.

0 Robert Lundström over 1 year ago in reply to David Baba

Prodigy 10 points

Hello,

Sorry if I was unclear, I mean these values:

//Robert

0 David Baba over 1 year ago in reply to Robert Lundström

TI__Mastermind 40040 points

Hello Robert,

We will not be able to guarantee these max and min specifications. We can only guarantee what is specified in the published electrical table. For an approximation, please assume the variation is approximately 6 to 10% higher than the min/max values respectively.

Hope this helps.

David.,

Power management

Power management forum

LM5163H-Q1: EN/UVLO VSD-RISING/FALLING