TPS22976: Maximum rating of RPD

Shuhei Goto

Intellectual 2240 points

Part Number: TPS22976

Hi team,

Up to how many a of current can be used the output pull-down resistor?
Customer assumes 1.8-V voltage.

Best regards,
Goto

6 months ago

0 Patrick Shalton 6 months ago

TI__Mastermind 20310 points

Hi Goto-san,

This isn't specified or tested, but the current through the QOD pin would be 1.8V / 230Ohm = ~8mA. I think that should be fine for steady state. Anything larger I would be very careful on - why does the customer want to force current through the QOD resistor?

Thanks,

Patrick

0 Shuhei Goto 6 months ago in reply to Patrick Shalton

TI__Intellectual 2240 points

Hi Patrick,

Thank you for your reply.

Customer uses like this system for unique evaluation.
Specifically,
1.8V +/- 10%, 9mA(max), 20min flow
Is this condition safe?

Best regards,
Goto

Power management

Power management forum

TPS22976: Maximum rating of RPD