• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 133 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV758P: TLV75801PDBVR : Suggest maximum or minimum value for (R1 + R2)

Link Huang
Prodigy 10 points
Part Number: TLV758P

Hi TI support,

I would like to know the recommanded value for R1 and R2. Is there suggested maximum and minimum value for (R1 + R2)?

Thanks,

Link

  • +1
    TI__Mastermind 35825 points

    Hi Link,

    There is no minimum or maximum value.  Keep in mind that if your resistors are very large, the leakage current from the FB pin can slightly change the output voltage, thus resistors are typically held to less than 1 megaohm.

    Thanks,

    Stephen