Other Parts Discussed in Thread: BQ79616
Hello,
I need examples source code of bq79631-q1 with detailed procedures of how to calculate and monitor insulation and pack voltages.
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I need examples source code of bq79631-q1 with detailed procedures of how to calculate and monitor insulation and pack voltages.
Thanks
Hi Muhammad,
You can take a look at the App Note BQ79616-Q1 Software Design Reference to get an introduction to the structure of out BQ796XX devices. There are some examples provided that can help you get started.
If you also request access to the mysecure for BQ79616 on the product page, there is also example code provided there
Best Regards,
Anthony Pham
I can see the reference code for BQ79616 but there is no reference code of BQ79631-Q1.
Hi Muhammad,
The wake, autoaddress, and read/write functionality will be the same.
Reading GPIO voltages are done by configuring the GPIOs as input and read from their corresponding registers as described in the section titled GPIOs and TSREF Measurements.
For reading the insulation, there is a detailed procedure in Section 9.2.1.2.2 of the datasheet which will require use of some GPIOs.
Best Regards,
Anthony Pham