• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 63 subscribers
  • Views 174 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27545-G1: DF, unit of each value of Configuration:Lifetime Resolution

Hitoshi Okuma
Intellectual 260 points
Part Number: BQ27545-G1
Other Parts Discussed in Thread: BQSTUDIO

Hi,

Currently I can't check it with bqStudio and I can't find any suitable information from the documentation (SLUSAT0E, SLUA656).

LT Temp Res (0.1degC)
LT V Res (mV)
LT Cur Res (mA)
LT Update Time (sec or min?)

*() is what I guessed after reading SLUA656

Regards,
Hitoshi Okuma

  • +1
    TI__Mastermind 28490 points

    Hi Hitoshi,

    I believe you are correct. For LT Update Time, I believe this will be in seconds.

    These values are the difference of the measurement compared to the thresholds if the measurement goes outside of the threshold values:

    Regards,

    Anthony Baldino

  • 0 in reply to Anthony
    Intellectual 260 points

    Hi Anthony,

    I also saw the same table.
    The main reason I asked this question is that the units of the Lifetime Resolution parameters in this table were all num.

    I'm relieved that your thoughts agree with mine.
    Thank you.

    Regards,
    Hitoshi Okuma