Hi,
My customer wants to proceed with the circuit design of TPS1HB16-Q1.
However, they don't know how to connect Module GND and Device GND.
Please guide me on how to connect.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
My customer wants to proceed with the circuit design of TPS1HB16-Q1.
However, they don't know how to connect Module GND and Device GND.
Please guide me on how to connect.
Hi CHO,
It's typically recommended to separate Module GND and Device GND with a diode-resistor network as shown here in the picture you sent.
Thanks,
Patrick