Re: How to choose the value for the UVP resistor divider -It was said that UVP pin has internal pullup to Vcc.
Question: What is the value of that pullup current?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Re: How to choose the value for the UVP resistor divider -It was said that UVP pin has internal pullup to Vcc.
Question: What is the value of that pullup current?
Hi Tonu,
Our expert is out of office and will give you feedback when comes back.
Hi Tonu,
Please refer to this E2E FAQ - [FAQ] How to design the UVP resistor divider for TPS922055 / TPS922054 / TPS922053 / TPS922052? - Power management forum - Power management - TI E2E support forums.
It was said that UVP pin has internal pullup to Vcc.
Question: What is the value of that pullup current?
The typical value of the pullup current is 1uA.
Best Regards,
Steven