LM5156H-Q1: Power-On Hours (POH)

franziskus

Part Number: LM5156H-Q1
Other Parts Discussed in Thread: LM5156

Team,

chapter 10.1 of the datasheet states the POH. The values are far below what my customer needs.
However, their operating conditions are below max Vin and below 101C junction temp.

Is there a formula or calculation to help estimate the POH better for their operating conditions?

Best regards

11 months ago

+1 Niklas Schwarz 11 months ago

TI__Mastermind 26330 points

Hi Franziskus,

Thanks for using the e2e forum.
If the input parameters are not close to the abs max ratings, a longer product lifetime is to be expected.
Unfortunately, I do not have a formula to calculate the expected lifetime of the LM5156 device.

For additional documentary, I can recommend to check the quality & reliability section of the device, which is linked in the right most column of the ordering table:
https://www.ti.com/product/LM5156H-Q1#order-quality

Best regards,
Niklas

0 franziskus 10 months ago in reply to Niklas Schwarz

TI__Expert 7779 points

Thanks Niklas! Let me talk to them and get back to you in case they need anything else.

Best regards

Power management

Power management forum

LM5156H-Q1: Power-On Hours (POH)