We tested the FV at GRL, and there was a test item of
3.6.3
Item : Display RTD3 Support
Detail : TBT root port cannot properly enter RTD3 mode when connecting 4K monitor.
Is there any setting for PD_FW?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We tested the FV at GRL, and there was a test item of
3.6.3
Item : Display RTD3 Support
Detail : TBT root port cannot properly enter RTD3 mode when connecting 4K monitor.
Is there any setting for PD_FW?
Dear Shubha:
Our .PJT as Attach
7230.X370_TBT5_TPS65994BH_F909p12p15_Tiger_PDv3115_20240410-1.pjt
GRL Error List
3.6.3 "Item : Display RTD3 Support
Detail : TBT root port cannot properly enter RTD3 mode when connecting 4K monitor."
Hi Marty ,
I will request you to please update the full GRL report.
Thanks ,
Shubha
Hi Marty ,
Thanks for sharing the report.
I will review and share me feedback by tomorrow.
Thanks ,
Shubha
Hi Marty,
Apologies for the delay.
I could not find the test spec related to 3.6.3
Can you please help in providing the same.
Thankyou!
Thanks ,
Shubha
Hi Marty ,
Thanks for sharing the spec.
PD_FW does not have any setting related to D3 power state pr RTD3 which are the failures.
Please share USB-PD and I2C logs if the issue needs to be further investigated.
Thanks ,
Shubha