• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 63 subscribers
  • Views 221 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27Z561-R2: Learning Cycle Query

Shivani Patel
Prodigy 145 points
Part Number: BQ27Z561-R2

Hello TI Team,

I have below queries regarding learning cycle before saving/extracting golden images from Bq Studio.

  1. After completing learning cycle, is it necessary to set Update Status in Data Memory to 0x02 from 0x06 manually as mentioned in "Achieving The Successful Learning Cycle" document ?

2. Also do we need to clear/disable GAUGE_ENABLE bit?

Regards,

Shivani Patel

  • 0
    TI__Mastermind 37761 points

    Hey Shivani,

    It is not required to disable the gauge before saving the golden file. However, this is what we recommend.

    Regards,

    Nick Richards

  • 0 in reply to Adrian
    Prodigy 145 points

    Hi Nick,

    Thanks for the response.

    Can you please answer the below quetion whcih I have asked 1st?

    1. After completing learning cycle, is it necessary to set Update Status in Data Memory to 0x02 from 0x06 manually as mentioned in "Achieving The Successful Learning Cycle" document ?

    Regards,

    Shivani Patel

  • 0 in reply to Shivani Patel
    TI__Mastermind 37761 points

    Hey Shivani,

    Sorry I should have explicitly stated that my response was answering both of your questions. If Update status is 0x06, when you disable gauging update status changes from 0x06 to 0x02. You don't have to manually change the bit, you can just send the gauge enable command.

    Regards,

    Nick Richards