• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 249 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25170: STAT pin blink when thermal shutdown

Shuhei Goto
Expert 4910 points
Part Number: BQ25170

Hi team,

When thermal shutdown works, does STAT pin blink at 1kHz same as other error mode?

Best regards,
Goto

  • +1
    TI__Guru* 75786 points

    Hi Goto 

    Yes -- STAT will blink at 1kHz.

    Update -- No for thermal shutdown the STAT pin blink is a short pulse every 2 sec.  

    If you are seeing 1kHz this could be open battery condition, unit cycle between charge and charge complete. 

    Sorry for the error.