• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 102 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC21530-Q1: How to calculate I(VDDA), I(VSSA), I(VDDB), and I(VSSB)

Yutaka Naito
Prodigy 10 points
Part Number: UCC21530-Q1

How do I calculate I(VDDA), I(VSSA), I(VDDB), and I(VSSB) when VDDA=VDDB=18V, VSSA=VSSB=-5V, Qg=40nC, and f=150kHz?

  • +1
    TI__Expert 5190 points

    Hello Yutaka-san, 

    For each channel of the gate driver, average switching current can be calculated by Isw = Qg * fsw. Add the calculated switching current to the quiescent current in the datasheet (attached below) gives you the total current consumed. 

    Hope this helps, 

    Vivian